Digital Personal Video Recorder

The default Password is 0000.

User’s Manual

PVR-9150T

Please read this manual carefully before setting up

your Personal Video Recorder PVR-9150T.

Notice

Thank you for purchasing a Humax PVR-9150T product.

Freeview Playback explained:

• Accurate recording

The start and end times of scheduled recordings will track the signal meaning the recording will start and stop at the times sent by the broadcasters. If a programme starts early or runs late the record time will automatically be adjusted to record the whole programme.

• Series Link

If a programme you wish to record is in a series, you can now record the whole series. If the programme changes to a different day or time the PVR-9150T will track these changes and still record the programme.

• Alternate Instances

If a scheduled recording(s) overlap with other programmes set to record you will be given the option to record one of the programmes later that, day or week, on the same channel or a different channel.

• Split Recordings

If a programme has two parts split by another entry in the Guide (e.g. a film divided in to two parts by a News programme) you will be given the option to set both parts to record.

Note: The above Freeview Playback features are available on channels where the correct and accurate data is being broadcast. Some channels may not support all services.

GB1

User’s Manual

Notice

Thank you for purchasing a HUMAX product. Please read this user’s manual carefully to be able to safely install, use and maintain the product at maximum performance. Keep this user’s manual next to your product for future reference. The information in this user’s manual is subject to change without notice.

Copyright (Copyright © 2008 HUMAX Corporation)

Not to be copied, used or translated in part or whole without HUMAX’s prior consent in writing except approval of ownership of copyright and copyright law.

Warranty

The warranty does not cover parts which may become defective due to misuse of the information contained in this manual.

Trademarks

• Viaccess is a trademark of France Telecom.

• CryptoWorks is a trademark of Irdeto Access B.V.

• Irdeto is a trademark of Irdeto Access B.V.

• Nagravision is a registered trademark of KUDELSKI S.A.

• Conax is a trademark of Telenor Conax AS.

Warnings, Cautions and Notes

Throughout the whole manual, pay special attention to the following marks that indicate hazardous situations.

• Warning

Indicates a hazardous situation which could result in serious injury.

• Caution

Indicates a situation which could damage the equipment or other apparatus.

• Note

Indicates additional information to make the user aware of possible problems and information of any importance to help understand, use and maintain the installation.

Meaning of Symbols

To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel.

This symbol indicates dangerous voltage inside the product that presents a risk of electric shock or personal injury.

This symbol indicates important instructions accompanying the product.

GB2

User’s Manual

Notice

Instruction about the ‘WEEE’ Symbol

This product should not be disposed with other household wastes at the end of its working life. Please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. This will prevent possible harm to the environment or human health from uncontrolled waste disposal.

• Domestic users: Please contact either the retailer where you purchased this product or their local government office for details of where and how they can take this item for environmentally safe recycling.

• Business users: Contact your supplier and check the terms and conditions of the purchase contract.

This product should not be mixed with other commercial wastes for disposal.

Important Notice

Before unpacking this product, you should check that you are in a Freeview Coverage area in one of the follow ways:

• Contact the Humax Customer Helpline on 0870 247 8800 (all calls charged at the national rate) for information on Freeview coverage in your area.

• Text your postcode to Freeview on 83331 (standard text rates apply). Freeview will reply with advice on whether you can receive Digital TV.

• Telephone Freeview on 08708 80 99 80 (all calls charged at National Rate). They will tell you whether you can receive Digital TV in your postcode area.

• Visit www.freeview.co.uk. You can enter your postcode for information on availability in your area.

• Telephone the shop where you bought this product. (The number is usually printed on the till receipt).

Note: To receive digital signals you may need to reposition or upgrade your existing roof aerial.

1. Due to the age or condition of your aerial and cabling you may not be able to receiver digital signals.

2. In your location the digital channels may be transmitted on a different frequency to your existing analogue signals and you may need a different type of aerial to receive them.

3. The new digital channels may be transmitted from a new transmitter, which means your aerial may need to be realigned. (Alternatively, you could add a second aerial to your system.) For any further information contact the Humax Customer Helpline:

• Tel: 0870 247 8800

• Email : uksupport@humax-digital.co.uk

• Open : Lines open Monday to Friday 9:00am to 6:00pm (Excludes Bank Holidays) Note: Calls charged at the national rate

GB3

User’s Manual

Safety Warning

This product has been manufactured to comply with international safety standards. Please read the following safety precautions carefully.

Safety Instructions and Precautions

1. MAINS SUPPLY

90-250V a.c., 50/60Hz

• Operate this product only from the type of power supply indicated on the marking label. If you are not sure of the type of power supplied to your home, consult your local power company.

• Disconnect the product from the mains before you start any maintenance or installation procedures.

2. OVERLOADING

• Do not overload a wall outlet, extension cord or adapter as this may result in electric fire or shock.

3. LIQUIDS

• The product should not be exposed to liquid of any kind. In addition, no objects filled with liquid should be placed on the apparatus.

4. CLEANING

• Disconnect the product from the wall outlet before cleaning.

• Use a light damp cloth (no solvents) to dust the product.

5. VENTILATION

• The slots on top of the product must be left uncovered to allow proper airflow into the unit.

• Do not stand the product on soft furnishings or carpets.

• Do not stack electronic equipments on top of the product.

6. ATTACHMENTS

• Do not use any unsupported attachments as these may be hazardous or cause damage to the product.

7. CONNECTION TO THE AERIAL

• Disconnect the product from the mains before connecting or disconnecting the cable from the aerial.

Failure to do so can damage the aerial.

8. CONNECTION TO THE TV

• Disconnect the product from the mains before connecting or disconnecting the cable from the TV.

Failure to do so can damage the TV.

9. LOCATION

• Place the product indoors to avoid exposing it to lightning, rain or sun.

• Do not place it near a radiator or heat register.

• We recommend that the product has 10 cm clearance from any other appliances susceptible to electromagnetic influences, such as a TV or a VCR.

• Do not block the openings with any object, and do not place the product on a bed, sofa, rug, or other similar surface.

• If you place the product on a rack or a bookcase, ensure that there is adequate ventilation and that you have followed the manufacturer’s instructions for mounting.

• Do not place the product on an unstable cart, stand, tripod, bracket, or table where it can fall. A falling product can cause serious injury to a child or adult, and serious damage to the appliance.

10. LIGHTNING, STORM or NOT IN USE

• Unplug the product from the wall outlet and disconnect the antenna during a thunderstorm or when left unattended and unused for long periods of time. This will prevent damage to the unit due to lightning and power-surges.

GB4

User’s Manual

Safety Warning

11. EXTRANEOUS OBJECTS

• Do not insert anything through the openings in the unit, where they can touch dangerous voltage points or damage parts.

12. REPLACEMENT of PARTS

• When replacement of parts is required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part. Unauthorized substitution may result in additional damage to the unit.

Warning

1. To avoid damage of the power cord or plug;

• Do not modify or process the power cord or plug arbitrarily.

• Do not bend or twist the power cord.

• Make sure to disconnect the power cord holding the plug.

• Keep heating appliances as far as possible from the power cord in order to prevent the cover vinyl from melting.

• The mains plug, as a disconnection device, shall remain readily accessible by the user.

2. To avoid electrical shock;

• Do not open the main body.

• Do not insert metal or inflammable objects inside the product.

• Do not touch the power plug with wet hands.

• Disconnect the power cord in case of lightning.

3. To avoid damage of product;

• Do not use the product when it is out of order. If you continue to use the product when defective, serious damage can be caused to it. Make sure to contact your local product distributor if the product is out of order.

• Do not insert metal or alien substance into the slots for the modules or Smartcards. It may cause damage to the product and reduce its life span.

4. Hard Disk Drive

• Do not move the product or turn the power off suddenly while the hard disk drive is running. The company shall not be liable for any corruption of data on the hard disk drive caused by the carelessness or misuse of users.

GB5

User’s Manual

Contents

1. Before Using the Product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB8

1.1 Package Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB8

1.2 Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB9

1.3 Conditional Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB10

1.4 Rear Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB11

1.5 Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB12

2. Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB15

2.1 Connecting the Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB15

2.2 Connecting the TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB16

2.3 Connecting the TV and VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB17

2.4 Powering On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB19

3. Installation Wizard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB20

3.1 Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB20

4. Basic Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB21

4.1 Switching Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB21

4.2 Volume Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB21

4.3 Text and Interactive Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB21

4.4 Programme Information (i-plate) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB22

4.5 Option List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB23

4.6 Channel List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB26

4.7 PIP (Picture-in-Picture) Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB27

4.8 Game. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB28

5. PVR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB29

5.1 Time Shifted Recording (TSR) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB29

5.2 Recording. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB31

5.3 Programme Playback in the Play List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB32

5.4 Chase Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB33

5.5 Bookmark . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB33

5.6 Additional Time Shift Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB34

6. Programme Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB35

6.1 Viewing Programme Guide Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB35

6.2 Selecting Channel Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB36

6.3 Using Time Bar. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB37

6.4 Schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB37

6.5 Finding Programmes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB38

7. Record. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB39

7.1 Recorded Programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB39

7.2 Recording Schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB42

7.3 HDD Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB45

7.4 Recording’s Start/End Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB45

GB6

User’s Manual

Contents

8. Preferences. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB46

8.1 Parental Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB46

8.2 Language Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB47

8.3 Time Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB48

8.4 A/V Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB49

8.5 Miscellaneous Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB50

9. Edit Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB52

9.1 Edit Channel Lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB52

9.2 Edit Favourite Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB53

10. Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB54

10.1 Automatic Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB54

10.2 Manual Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB55

10.3 Default Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB56

10.4 Antenna Power. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB56

11. Software Update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB57

11.1 OTA (Over the Air) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB57

11.2 Updating Software from Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB58

11.3 Software Update from PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB60

12. System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB61

12.1 Status. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB61

12.2 Signal Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB61

12.3 Common Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB61

13. Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB62

13.1 Menu Map. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB62

13.2 Trouble Shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB63

13.3 Error Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB67

13.4. Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB68

13.5 Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB70

13.6 Service and Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB71

GB7

User’s Manual

1. Before Using the Product

This chapter provides detail instructions on the product and its accessories.

1.1 Package Contents

Please check all package contents before using your product.

Quick Guide

User’s Manual

Remote Control

User’s Manual

Quick Guide

Batteries

SCART Cable

Note: Package contents may vary according to area.

Warning: The company shall not be liable for problems caused by changing hard disk drive by user.

GB8

User’s Manual

1. Before Using the Product

1.2 Front Panel

1

2 3 4 5 6 7

8

9

10

1. GUIDE

Displays the programme guide.

2. STANDBY BUTTON

Switches between operation and standby modes.

3. MENU

Displays the main menu.

4. ARROW BUTTONS

Changes the channel or moves the cursor up, down, left or right.

5. OK

Selects a menu or confirms the selected operation.

6. TV/RADIO BUTTON

Switches between TV and radio modes.

7. CH-/CH+ BUTTON

Moves the TV/radio channel up or down.

8. RECORD BUTTON

Records programme.

9. STOP BUTTON

Stops recording or playback.

10. CI-MODULE SLOT

A slot for a CI-Module

Note: The front of the product is subject to change without notice.

GB9

User’s Manual

1. Before Using the Product

1.3 Conditional Access

Most TV and radio channels are free to air, however some TV and radio/music channels are available on a subscription basis and can only be enjoyed via a Conditional Access component. The Conditional Access component is a removable Smartcard.

1. Inserting a CI-Module (with Smartcard)

A CI-Module looks like a PC map (PCMCIA) for laptops. There are different kinds of CI-Modules, suitable for different coding systems; Irdeto, Conax and more. Additionally to the CI-Module, a Smartcard is needed to decode the channels.

1. Open the right-hand flap on the front of the product.

2. Follow the instructions of the module and insert the Smartcard into the CI-Module.

3. Keep the CI-Module (with the Smartcard) horizontal.

4. Insert the CI-Module into the slot.

CI-Module

Smartcard

GB10

User’s Manual

1. Before Using the Product

1.4 Rear Panel

1

2

3

4

5

6

1. TV SCART

Connects to the TV using a TV SCART cable

2. VCR SCART

Connects to the VCR or DVD using a VCR SCART cable.

3. RS-232C

Connects to the PC to update software.

4. ANTENNA IN

Connects the aerial cable.

5. TV/VCR

Connects to the RF IN of the TV or VCR using an RF cable.

6. ON/OFF

Powers on/off.

Note: The rear of the product is subject to change without notice.

GB11

User’s Manual

1. Before Using the Product

1.5 Remote Control

1. NUMERIC(0-9) BUTTONS

Enters a TV/radio channel number or menu

option number.

2. MENU

Displays the main menu.

3. PLAYBACK CONTROL BUTTONS

a. FAST REWIND

Rewinds at high speed. Each time you press

this button the rewind speed is increased.

b. PLAY

Plays at normal speed or resumes.

c. FAST FORWARD

Fasts forward at high speed. Each time you press

this button the fast forward speed is increased.

d. RECORD

Records programme.

e. PAUSE

Pauses the live programme or recording.

f. STOP

Stops a recording or goes to the live

programme.

4. COLOUR BUTTONS

Selects colour keys for interactive/text

channels.

5. LIST

Displays the channel list.

Please slide down the

6. ARROW BUTTONS

bottom section of the

Navigates through the menu options.

remote control to find

the additional buttons.

7. EXIT

Exits all On-Screen Display (OSD) screens.

8. VOL+/VOL-

Adjusts the audio volume.

9. i (INFORMATION)

Note: The remote control is subject to change

Displays the channel and programme

without notice.

information.

GB12

User’s Manual

1. Before Using the Product

10. STANDBY

Switches between operation and standby

modes.

11. TEXT

Enters digital text service.

12. GUIDE

Displays the programme guide.

13. OK

Selects a menu or confirms the selected

operation. Also, displays the channel list while

watching a programme.

14. BACK

Closes and returns to the previous menu and

screen.

15. CH+/CH- or PAGE+/PAGE-

Changes the channel or page.

16. MUTE

Mutes or unmutes the audio temporarily.

17. Group 17

g. SOURCE

Controls the input of TV.

h. OPT+

Displays the channel attributes while watching

a programme.

i. PLAY LIST

Please slide down the

Displays the recorded programme list.

bottom section of the

j. SUBTITLE

remote control to find

Displays the subtitle language list.

the additional buttons.

k. SOUNDTRACK

Displays the soundtrack list.

l. WIDE

Sets the display format.

GB13

User’s Manual

1. Before Using the Product

18. Group 18

m.ADD BOOKMARK

Saves the current viewing position as a

bookmark.

n. BOOKMARK LIST

Displays the list of saved viewing positions.

o. A-B

Plays back a specified block repeatedly.

p. INSTANT REPLAY

Jumps back and plays from that location.

(See section 5.6)

q. SLOW MOTION

Plays the programme in slow motion. Each

time you press this button, speed is slowed

progressively more.

r. COMMERCIAL SKIP

Jumps ahead in a recording. (See section 5.6)

19. PIP BUTTONS

s. PIP

Displays the PIP (Picture in Picture) screen.

t. PIP CH+/CH-

Changes the PIP channel.

u. MOVE PIP

Changes the position of the PIP screen.

v. SWAP PIP

Swaps the focus between the main and the PIP

screen.

20. G (Game)

Displays the games.

21. TV/RADIO

Switches between TV and radio modes.

Please slide down the

bottom section of the

remote control to find

the additional buttons.

GB14

User’s Manual

2. Setup

This chapter describes how to connect the product to the TV with the particular equipments for gaining optimum signal quality. The product provides various interfaces to connect to the TV, VCR or other devices. Select the most appropriate procedure depending on the equipment you have.

Note: If you encounter any problems setting up your product, please contact your local product distributor.

2.1 Connecting the Antenna

Connect your aerial to the ANTENNA IN.

Note: Connect the product and the TV using an RF cable to watch analogue channels.

RF Cable

TV Antenna IN

GB15

User’s Manual

2. Setup

2.2 Connecting the TV

1. Using SCART Cable

Connect the product and the TV using a SCART cable.

SCART Cable

TV SCART

GB16

User’s Manual

2. Setup

2.3 Connecting the TV and VCR

1. Using SCART Cable

Connect the product and the TV/VCR using a SCART cable.

SCART Cable

SCART Cable

TV SCART

VCR SCART

GB17

User’s Manual

RF Cable

TV Antenna IN

TV Antenna OUT

VCR Antenna IN

VCR Antenna OUT

RF Cable

SCART Cable

2. Setup

SCART Cable

2. Using RF Cable

1. Connect the TV/VCR (LOOP OUT) of the product and the aerial input of the VCR using an RF cable.

2. Connect the aerial output of the VCR and the aer

TV SCART

ial input of the

VCR SC TV using an RF cable

ART

.

RF Cable

TV Antenna IN

TV Antenna OUT

VCR Antenna IN

VCR Antenna OUT

RF Cable

GB18

User’s Manual

2. Setup

2.4 Powering On

1. Connect the power cord of the product to a wall outlet.

2. Turn on the power switch located at the back left of the product.

3. Power on by pressing the STANDBY button of the remote control or the STANDBY button at the front of the product.

Zoom in

STANDBY

1

2

3

4

5

6

7

8

9

MENU

0

TEXT

GB19

User’s Manual

3. Installation Wizard

This will guide you through the installation procedure to automatically search for the digital channels.

(Installation wizard will also run after the product has been returned to default settings.) 3.1 Search

Please wait until the channel search is complete.

1. During the channel search, the cursor is located at Stop.

Therefore, if you press the OK button during the search, the search will stop and the channels found until then will be displayed.

2. If the search does not find any channels, then press the OK

button to access the installation menu to search for the

channels again. Please make sure that you have connected your aerial correctly.

3. You can delete unwanted channels from the found channels.

Select the channels to delete and press the OK button. Then select Delete and press the OK button. To delete all channels, select Select All to select all channels, select Delete and press the OK button.

4. After completing the channel search and deleting unwanted channels, select Save to save the changes.

Warning: If you exit the install wizard without fully completing the channel searching procedure, you may not have all

of the channels available. In this case, you can use the

installation menu to search for the channels.

GB20

User’s Manual

4. Basic Operation

This chapter describes functions such as switching channel, volume control and basic features for watching programmes.

4.1 Switching Channel

You can switch the current channel using one of the following methods.

1. Press the CH+/CH- button.

2. Enter the channel number using the NUMERIC(0-9) buttons to move to the channel directly.

3. Press the TV/RADIO button to switch between TV channels and radio channels.

Note:

• You can switch channel using the channel list or programme guide.

• Please refer to 4.6 Channel List and Chapter 6. Programme Guide for more information.

4.2 Volume Control

1. Press the VOL+/VOL- button to adjust the audio volume.

2. Press the MUTE button to stop the audio temporarily.

PIP

PIP

PIP

PIP

PIP

SOURCE

OPT+

SOURCE

OPT+

SOURCE

OPT+

PIP CH+

SOURCE

OPT+

Note: The mute function remains set while you switch channels.

PIP CH+

PIP CH+

PIP CH+

PIP CH+

WIDE

WIDE

WIDE

WIDE

PIP CH-

PIP CH-

PIP CH-

PIP CH-

PIP CH-

MOVE

MOVE

MOVE

MOVE

MOVE

SWAP

SWAP

SWAP

SWAP

SWAP

4.3 Text and Interactive Services

If your chosen channel has digital teletext features, you can access them. Teletext services often load automatically shortly after the digital teletext window is displayed. In which case, simply follow the on screen instructions(press color buttons).

PIP

PIP

PIP

PIP

PIP

SOURCE

OPT+

SOURCE

OPT+

SOURCE

OPT+

SOURCE

OPT+

SOURCE

OPT+

PIP CH+

PIP CH+

PIP CH+

PIP CH+

PIP CH+

1. Press the TEXT button to access digital teletext.

WIDE

WIDE

WIDE

WIDE

WIDE

PIP CH-

PIP CH-

PIP CH-

PIP CH-

PIP CH-

2. Press the TEXT button again to return to normal viewing.

MOVE

MOVE

MOVE

MOVE

MOVE

3. Press the CH+/CH- button to exit this service.

SWAP

SWAP

SWAP

SWAP

SWAP

Note: Interactive service(MHEG) is not available when subtitles are displayed.

GB21

User’s Manual

4. Basic Operation

4.4 Programme Information (i-plate)

Programme information is always displayed for a certain period of time whenever you switch channels.

You can view the programme information by pressing the i button while watching a programme. Press the

EXIT button to hide the i-plate.

1

5

2

6

3

7

4

8

1. General Information

The general information is displayed on the screen as the following.

1. Channel number and name

2. Programme name

3. Detailed programme information: Displayed if detailed programme information is provided.

4. Current channel list icon

5. Current time

6. Icons

Displayed only when the pr

1

2

3

og

4 ramme is a split programme.

Displayed only when the programme is a series programme.

REC1

REC1

Displayed only if the programme is recording.

Displayed only if the programme is reserved.

Represents parental level. Indicates age classification level-if supplied by the broadcaster Displayed only when the channel is a locked channel.

Displayed only when the channel is a scrambled (Pay TV channel) channel.

Displayed only when subtitle information is available.

MHEG

MHEG

Displayed when the channel supports teletext (MHEG).

Displayed when the channel supports data channel.

7. Next programme information: Displayed if next programme information is provided. Press the u 1

2

3

4

button to display the next programme information.

8. Programme broadcasting time and progress bar: Displays programme playing time and progress bar.

1

2

3

4

Note: If there is no programme information available, programme information is not displayed.

REC1

REC1

GB22

User’s Manual

MHEG

MHEG

4. Basic Operation

2. Detailed Programme Information.

You can see detailed information about the current programme.

Press the i button when the i-plate is displayed to view detailed information.

Note:

• Press the i button again to hide the information box.

• If the detail information is more than one page, use the p/q button to move to the previous/next page.

4.5 Option List

You can view and confirm detailed information about the current channel and change the information if necessary.

1. Adding a Channel to Favourite Group

You can add the current channel to favourite group immediately. Also, you can add channels to favourite groups.

1. Press the OPT+ button.

2. Select Favourite using the p/q button and press the OK or u button.

3. Select favourite group using the p/q button and press the OK

button to register for favourite group.

4. Press the OK button again on the selected favourite group to release the registered channel.

5. Move to the parent menu using the t button to save the changes automatically.

Note: For detailed information about how to change favourite group name and how to register favourite channels from the complete channel list, please refer to 4.6 Channel List.

GB23

User’s Manual

4. Basic Operation

2. Subtitle

If the current programme provides subtitle information, you can select the language for the subtitle.

1. Press the OPT+ button.

2. Select Subtitle using the p/q button and press the OK or u button.

3. Select the subtitle language using the p/q button and press the OK button. The subtitles will be displayed at the bottom of the screen.

4. Select Off from the subtitle menu to switch the subtitles off.

Note:

• You also can change the subtitle by pressing the SUBTITLE

button on the remote control.

• You can select a default subtitle language in MENU–Preferences–Language Setting–Subtitle Language.

3. Soundtrack

If the current programme is available in multiple audio languages, you can select the language that you wish to listen to.

1. Press the OPT+ button.

2. Select Soundtrack using the p/q button and press the OK or u button.

3. Select the audio language using the p/q button.

4. Select soundtrack direction(left, right, stereo) using the t/u button.

5. Press the EXIT or SOUNDTRACK button to exit the soundtrack list.

Note:

• You also can set the soundtrack by pressing the SOUNDTRACK

button on the remote control.

• You can select the default audio language you want in

MENU–Preferences–Language Setting–Audio Language.

• If your receiver is connected to a TV that does not support compressed audio using a HDMI cable, the audio may not

function. Select another audio option other than compressed audio.

GB24

User’s Manual

4. Basic Operation

4. Locking/Unlocking a Channel

You can lock or unlock the current channel while watching a programme.

1. Press the OPT+ button.

2. Select Lock/Unlock using the p/q button and press the OK or u button.

3. Select Lock option using the p/q button and press the OK

button.

4. Select Unlock option using the p/q button and press the OK

button.

5. You will be prompted to enter the password. Enter the

password to unlock the channel.

6. Move to the parent menu using the t button to save the changes automatically.

Tip:

The default password is 0000. If you have forgotten your password, please contact your local product distributor.

5. Deleting a Channel

You can delete the current channel while watching a programme.

1. Press the OPT+ button.

2. Select Delete using the p/q button and press the OK or u button.

3. Select Yes in the confirmation message and press the OK

button.

4. Enter the password using the NUMERIC(0-9) buttons to delete the current channel.

GB25

User’s Manual

4. Basic Operation

4.6 Channel List

Five types of channel lists are provided for easy and quick channel browsing.

TV

The list of all TV channels with two sub-groups: one is sorted by channel number, the other is sorted by channel name (Alphabetical).

Radio

The list of all radio channels with two sub-groups: one is sorted by channel number, the other is sorted by channel name (Alphabetical).

Favourite

You can create five favourite lists for quick and easy access to the channels you watch more often. Using this feature, you can skip the channels you rarely or never watch.

Playlist

You can move to the Playlist to display the recorded programmes.

PIP CH LIST

You can move to the PIP channel list.

You can display the channel list and switch to another channel on the channel list.

1. Press the LIST button while watching a programme to display the channel list.

2. Select a channel using the p/q button and press the OK button to change the channel.

3. Enter the channel number directly using the NUMERIC(0-9) buttons to move the cursor to the channel you want. And then press the OK button to change to the selected channel.

4. Press the u button while the channel list is displayed to view the group list. Select a channel group using the p/q button and press the OK or u button.

Select a sub-group using the p/q button and then press

the OK button. The channel list for the selected sub-group is displayed.

Note:

• You can also display the channel list by pressing the OK button.

• If there are multiple channels, press the PAGE+/PAGE- button to move by page.

• Whenever you press the TV/RADIO button while the channel list is displayed, the channel list will switch between TV and radio channel lists.

• To display scramble icon in the channel list, select On in MENU-Preferences-Miscellaneous Settings-Option in CH List.

• The favourite lists will only appear if you have created them first.

GB26

User’s Manual

4. Basic Operation

4.7 PIP (Picture-in-Picture) Screen

Press the PIP button while watching TV to watch two channels at the same time. The audio from the main screen will be outputted. Press the PIP button to exit the PIP mode.

Note:

• The teletext (MHEG) is only available on the main screen.

• The PIP screen is available while recording a programme or playing back a recording. Some channels may not be available if you record two channels simultaneously.

• Only one scrambled (Pay TV) channel can be used with the PIP function.

1. Changing the PIP Mode

Each time you press the PIP button, the PIP size is changed, as displayed in the following figure.

1:6 PIP screen

Normal screen

1:1 PIP screen

2. Swapping the PIP Screen

This function is available in 1:6 PIP or 1:1 PIP.

PIP

PIP

PIP

PIP

PIP

PIP CH+

Press the SWAP PIP button on the remot

SOURCE

e c

OPT+ ontrol t

SOURCE

OPT+

SOURCE

OPT+

SOURCE

OPT+

PIP o sw

CH+

ap the main

PIP CH+

PIP CH+

PIP CH+

screen for the PIP screen. Press the CH+/CH- butt

WIDE

on t

WIDE

WIDE

WIDE

PIP CH-

o change the

PIP CH-

PIP CH-

PIP CH-

PIP CH-

main screen channel.

MOVE

MOVE

MOVE

MOVE

MOVE

SWAP

Note:

SWAP

SWAP

SWAP

SWAP

You cannot use the SWAP PIP function in the following cases: 1. When you are watching a radio channel.

2. When the screen displays the channel list, audio and detail information.

PIP

PIP

PIP

PIP

PIP

SOURCE

OPT+

SOURCE

OPT+

SOURCE

OPT+

SOURCE

OPT+

SOURCE

OPT+

PIP CH+

PIP CH+

PIP CH+

PIP CH+

PIP CH+

WIDE

WIDE

WIDE

WIDE

WIDE

PIP CH-

PIP CH-

PIP CH-

PIP CH- GB27

PIP CH-

MOVE

MOVE

MOVE

User’s M

MOVE anual

MOVE

SWAP

SWAP

SWAP

SWAP

SWAP

4. Basic Operation

3. Moving the PIP Screen

You can move the position of the PIP screen.

Each time you press the MOVE PIP button, the PIP screen moves, as displayed in the following figure.

4. Switching Channels in the PIP Screen

1. In PIP mode, press the PIP CH+/PIP CH- button to change the PIP

PIP

PIP

channel on the PIP screen only.

PIP

PIP

SOURCE

OPT+

SOURCE

OPT+

SOURCE

OPT+

PIP CH+

SOURCE

OPT+

PIP CH+

2.

PIP

CH+

Press the LIST button in the PIP mode and press the PIP CH+

u button

PIP CH+

WIDE

WIDE

WIDE

WIDE

PIP CH-

PIP CH-

to select the channel list group. Select PIP CH LIST

PIP CH-

using the

PIP CH-

PIP CH-

p

MOVE

MOVE

MOVE

/q button and press the OK button. Select the channel y MOVE

ou

MOVE

SWAP

SWAP

SWAP

want using the p/q button and press the OK butt

SWAP

on.

SWAP

4.8 Game

Provides various games for user’s entertainment.

PIP

PIP

PIP

PIP

PIP

SOURCE

OPT+

SOURCE

OPT+

SOURCE

OPT+

SOURCE

OPT+

1. Press the GAME button.

SOURCE

OPT+

PIP CH+

PIP CH+

PIP CH+

PIP CH+

PIP CH+

WIDE

WIDE

WIDE

WIDE

2. According to the instruction displayed on scr

WIDE

een, you can enjoy the game using the p/q/t/u and OK

PIP CH-

PIP CH-

PIP CH-

PIP CH-

button.

PIP CH-

MOVE

MOVE

MOVE

MOVE

MOVE

SWAP

SWAP

SWAP

NSWot

AP

e: Press the EXIT or BACK button to exit the game SWAP

.

GB28

User’s Manual

5. PVR

5.1 Time Shifted Recording (TSR)

You can perform TSR (Time Shifted Recording) and other functions similar to VCR functions using the playback control buttons while playing a programme.

The product automatically saves the programme in the embedded hard disk drive temporarily, so that users can pause, play, fast rewind, fast forward, replay, etc. even while watching the currently broadcasting TV programme.

1. Time Bar

If you press the PLAY button while watching TV, the time bar information will be displayed. Time bar displays the current operation status, the time gap between the broadcasting point and watching point and the amount of temporarily saved programme.

1. Operation status

4. Watching point

2. Watching point time (hh:mm:ss)

5. Broadcasting (Live) point

3. The amount of saved programme

6. Current time (hh:mm)

2. Pause

If you press the PAUSE button on the remote control, the current programme is paused. If you press the PAUSE button once again, the programme is resumed from that point.

Note: Pause makes the time gap or delay between the broadcasting (live) point and watching point. The time gap is equivalent to the period the programme was paused. Operations like slow motion and fast rewind also make the time gap. Press the STOP button to go to the live programme.

GB29

User’s Manual

5. PVR

3. Fast Rewind to Previous Scene

Press the FAST REWIND button on the remote control to watch the scene passed by. Each time you press the FAST REWIND button, the rewind speed increases. ( x2, x4, x16, x32, x64) If you press the PLAY button, the fast rewind operation stops and the programme is played at normal speed.

Note: You can fast rewind back to the start point. If you reach the start point while rewinding, the programme is automatically played at normal speed from that point.

4. Fast Forward to the Next Scene

Press the FAST FORWARD button on the remote control to fast forward the programme. Each time you pressthe FAST FORWARD button, the speed increases. ( x2, x4, x16, x32, x64) If you press the PLAY button, the fast forward operation stops and the programme is played at normal speed.

Note: You can use the fast forward operation only when there is a time gap between the current watching point and the broadcasting (live) point caused by some previous operations such as pause, slow motion or fast rewind. You can fast forward to the current broadcasting point. If the watching point reaches the broadcasting (live) point, the programme is automatically played at normal speed.

5. TSR Recording

Press the RECORD button on the remote control to record the current programme immediately. While the time shift operation records the programme temporarily, this record operation records the programme permanently so you can playback the recorded programme at any time. For more information about recording, refer to 5.2 Recording.

Adjusting the Recording End Time

Press the RECORD button while recording to adjust the recording end time. You can adjust the recording end time by -/+10 minutes using the t/u button, and then press the OK button to change the recording end time and hide the message screen.

GB30

User’s Manual

5. PVR

5.2 Recording

Using the built-in hard disk drive, you can record a programme without an external media device such as a VCR.

1. General Recording

Press the RECORD button on the remote control to record the current programme instantly. You can select the point you want to record using the t/u button. Press the RECORD button to start instant recording from that point.

To record another channel, change channels while recording and press the RECORD button again. You can record up to two channels simultaneously. While doing so, you can perform TSR (Time Shifted Recording) and view the programmes on air.

If you press the STOP button while recording two other channels, you will be prompted to select a recording you wish to stop.

If a reserved recording is about to start while recording two other channels already, you will be prompted to stop one of the currently recording channels.

Note:

• Ensure that there is enough free space before recording. If the free space on the hard disk drive is insufficient, recording will stop. Recording one hour of programme may require up to

2 or 3GB of hard disk space. The space for recording a 1 hour programme may differ depending on the programme.

• You can record radio programmes also.

2. Descrambling and Re-recording

You can descramble and re-record the recorded file.

1. Press the RECORD button at the point you want to record while playback.

2. Press the STOP button to stop recording. A pop-up message will appear. Select Yes and press the OK

button. Then the recording will stop but the playback will continue.

3. To find new recorded files in the play list, press the PLAY LIST button.

GB31

User’s Manual

5. PVR

5.3 Programme Playback in the Play List

You can playback the recorded programme by pressing the PLAY LIST button. You can switch among VIDEO(TV), AUDIO (radio) and Selected Files list using the t/u button.

1. VIDEO/AUDIO List

1. Select VIDEO/AUDIO list using the t/u button.

2. Select a programme using the p/q button and press the OK

button to play the recorded programme.

3. Select the programmes and press the GREEN button to select the recorded programmes. To unselect the selected

programmes, press the GREEN button again.

4. Select the programmes you want to delete using the GREEN

button and press the RED button to delete the recorded programmes.

5. Select the programmes you want to move using the GREEN

button and press the YELLOW button. Move the cursor to the destination using the p/q button and press the OK button. A pop-up will appear. Select Yes and press the OK button.

6. Each time you press the BLUE button, the sorting order of the recorded programmes change in the following sequence: by descending time, by ascending time, by name.

7. Select programmes you want to playback using the GREEN button and press the OK or PLAY button to play the recorded programmes. The programmes will be played in the selected order.

8. If you select programmes using the GREEN button, the programmes you select will add to Selected Files list automatically.

Note:

• Move is inactivated in VIDEO/AUDIO list.

• If you select or playback a split programme, other split programmes are also selected or played back continuously.

2. Selected Files List

1. Select Selected Files list using the t/u button.

2. All features are similar to those of VIDEO/AUDIO list.

Note:

• You also can playback the recorded programme in Menu–

Record–Recorded Programme. Please refer to 7.1 Recorded Programme.

• You can playback the programme currently being recorded. For more information, refer to 5.2 Recording.

• The playback icon will be displayed when the programme is being played.

• The recording icon will be displayed when the programme is being recorded.

• Certain parts of the programme may blink when playing back a recorded programme in case the recording mode is switched from scramble to descramble or vice versa.

GB32

User’s Manual

5. PVR

5.4 Chase Play

You can watch the programme from the beginning as the rest of the programme is simultaneously being recorded. While recording two channels simultaneously, you can perform TSR (Time Shifted Recording) using the playback control buttons.

PIP

PIP

PIP

PIP

PIP

SOURCE

OPT+

Note:

SOURCE

OPT+

SOURCE

OPT+

PIP CH+

SOURCE

OPT+

PIP CH+ You can playback the programme being recor

PIP ded af

CH+

ter it has been recorded for at least 30 PIP CH+

PIP CH+

WIDE

WIDE

WIDE

WIDE

PIP CH- seconds.

PIP CH-

PIP CH-

PIP CH-

PIP CH-

MOVE

MOVE

MOVE

MOVE

MOVE

SWAP

SWAP

SWAP

SWAP

SWAP

5.5 Bookmark

You can jump to a position directly using the bookmark in recorded programme playback. Use bookmarks to search positions quickly and conveniently.

1. Adding a Bookmark

Press the ADD BOOKMARK button at a certain position to set a PIP

PIP

bookmar

PIP

k while playing back a recorded programme.PIP

PIP

SOURCE

OPT+

SOURCE

OPT+

SOURCE

OPT+

SOURCE

OPT+

SOURCE

OPT+

PIP CH+

PIP CH+

PIP CH+

PIP CH+

PIP CH+

WIDE

WIDE

Not

WIDE

e: The bookmark function is only available for r

WIDE

ecorded

WIDE

PIP CH-

PIP CH-

PIP CH- programmes.

PIP CH-

PIP CH-

MOVE

MOVE

MOVE

MOVE

MOVE

SWAP

SWAP

SWAP

SWAP

SWAP

2. Bookmark List

1. Press the BOOKMARK LIST button after adding a bookmark.

2. Select the location you want to view using the p/q button and press the OK button to start playback from the location you have selected.

3. Press the BOOKMARK LIST button again to return to the play bar.

4. To delete a location, select the location you want to delete and press the ADD BOOKMARK button.

GB33

User’s Manual

5. PVR

5.6 Additional Time Shift Operations

PIP

PIP

PIP

PIP

PIP

SOURCE

OPT+

SOURCE

OPT+

SOURCE

OPT+

PIP CH+

SOURCE

OPT+

PIP CH+

PIP CH+

PIP CH+

PIP CH+

You can perform additional time shift operations using the following buttons on the remote control.

WIDE

WIDE

WIDE

WIDE

PIP CH-

PIP CH-

PIP CH-

PIP CH-

PIP CH-

MOVE

MOVE

MOVE

MOVE

MOVE

1. Direct Jump

SWAP

SWAP

SWAP

SWAP

SWAP

Press the PLAY button while watching TV. If you press the t/u button, a moving arrow will appear in the progress bar. Move this arrow to a time point using the t/u button and then press the OK button to play the programme from the specified time point. You can also move to the specified time point directly by entering the time you want using the NUMERIC(0-9) button while playing back a recorded programme.

2. Instant Replay

Press the INSTANT REPLAY button to jump back and play from that location. When the replay has been completed the programme will PIP

PIP

PIP

PIP

PIP

SOURCE

OPT+

SOURCE

OPT+

SOURCE

OPT+

SOURCE

OPT+

SOURCE

OPT+

play from the current point. Refer to 8.5 Miscellaneous Settings.

PIP CH+

PIP CH+

PIP CH+

PIP CH+

PIP CH+

WIDE

WIDE

WIDE

WIDE

WIDE

PIP CH-

PIP CH-

PIP CH-

PIP CH-

PIP CH-

MOVE

MOVE

MOVE

MOVE

MOVE

SWAP

SWAP

SWAP

SWAP

SWAP

3. Commercial Skipping 30 seconds

Press the COMMERCIAL SKIP button jump ahead in a recording. You can use the skip operation only when there is a time gap between the current watching point and the broadcasting point while using the fast forward operation. If the time gap is less than 30 seconds, the programme is played from the current broadcasting point. Refer to 8.5 Miscellaneous Settings.

4. Slow Motion

Press the SLOW MOTION button to play the current programme in slow motion. Each time you press the SLOW MOTION button, the speed decreases (x 1/2 , x 1/4, x 1/8). Press the PLAY button to stop playing in slow motion and return to normal speed.

5. Repeat Mode

You can select a specific block within a recorded programme and play it back repeatedly. Press the A-B

button to set the first repeating position. Select the second position using the t/u button and press the

A-B button. Then the programme plays back the selected block repeatedly. To stop the repeat mode, press the A-B button while repeating the selected block.

Press the STOP button to stop playing the saved programme and watch the current programme on air.

GB34

User’s Manual

6. Programme Guide

The programme guide displays programme information about each channel, based on the date and time.

You can also schedule your recording using the information given.

Note: Press the BACK, EXIT or GUIDE button to exit the guide screen.

6.1 Viewing Programme Guide Information

You can view the programme information of all channels. Press the GUIDE button.

1. Information of the Programme Guide Screen

The TV guide is displayed as follows.

5

1

6

2

3

7

4

1. Channel and programme information

2. Icon

Split Programme

Displayed only when the programme is a split programme.

Series

Displayed only when the programme is a series programme.

Reservation

Displayed only if the programme is reserved for recording.

Auto tracking

Displayed only when the auto tracking function is performed.

3. Group name

4. Indication of present time

5. Present date and time

6. Video preview window

7. Table date & time range

111

222

333

444

GB35

User’s Manual

REC1

REC1

REC1

REC1

MHEG

MHEG

MHEG

MHEG

6. Programme Guide

Note:

• Auto tracking can track the changes of the reserved programme and keep the reservation. Even when the broadcasting time of the reserved programme is changed, you can still record the reserved programme with the auto tracking feature.

• Auto tracking, split and series reservation are enabled only when Recording’s Start/End Time in the menu is set to On Time.

2. Using Programme Guide

1. Move to previous/next programme within the same channel using the t/u button.

2. Move back 2 hours or move 2 hours ahead within the same channel using the FAST REWIND or FAST

FORWARD button.

3. Use the Instant Reply or Commerical Skip button to move to move back or forward 1 day.

4. Select a programme and press the OK button. Then you can watch the programme if it is on air or reserve it if it is the future programme.

5. Press the i button in the selected programme to view the detailed information (if available) of the selected programme.

3. Scheduling Recording

You can automatically schedule recording in the scheduled programme and pressing the OK button.

1. Select the programme and press the OK button to complete reservation. The reservation icon will be displayed.

2. Select the scheduled programme and press the OK button to cancel reservation.

3. If you select a split programme, a pop-up will appear. Press the OK button.

4. If you select a series programme, a pop-up will appear. Select an option you want and press the OK button.

6.2 Selecting Channel Group

You can view programme information of the selected channel list by groups.

1. Press the GUIDE button.

2. Press the RED button to display the channel list group.

3. Select a channel list group using the p/q button.

4. Move the cursor to the sub-group using the u button, select a sub-group using the p/q button and then press the OK button.

The programme guide for the selected channel list is displayed.

GB36

User’s Manual

6. Programme Guide

6.3 Using Time Bar

You can quickly search the time zone using the time bar.

1. Press the GUIDE button.

2. Press the GREEN button to display time bar.

3. Select the each button using the t/u button and press the OK

button to move the time bar. If you press the button repeatedly, the same operation is repeated.

4. You can also use the FAST REWIND/FAST FORWARD and

INSTANT PLAY/COMMERCIAL SKIP buttons on the remote

control.

5. Each button functions as follows.

Exits the time bar.

Now

Moves to the current programme where the cursor is located.

Moves back to the previous programme or 30 minutes before.

1

2

M3oves f

4 orwards to the next programme or 30 minutes ahead.

Moves back to 2 hours before.

REC1

Moves forwards to 2 hours ahead.

Day

Day Moves back to one day before.

Day

Day Moves forwards to one day ahead.

6.4 Schedule

MHEG

You can add or edit recording-reserved programmes using the schedule screen.

1. Press the GUIDE button.

2. Press the YELLOW button.

Note: For more information about how to add or edit a 11

2

3

4

reser

2

3

4

11

v

22 ation, r

33

efer t

44

o 7.2 Recording Schedule.

11

22

33

44

REC1

REC1

REC1

REC1

REC1

REC1

MHEG

MHEG

MHEG

MHEG

MHEG

MHEG

GB37

User’s Manual

6. Programme Guide

6.5 Finding Programmes

You can find the programme you want by entering the name and genre of the programme.

1. Press the GUIDE button.

2. Press the BLUE button to display the keyboard.

3. Enter the programme name on the keyboard screen.

4. Select Previous/Next and press the OK button to switch the keyboard layout.

5. Select Find and press the OK button.

6. Select a programme and press the OK button to watch or reserve it.

Note:

• If you want to find the programme by genre, select By Genre and press the OK button. Select the genre and press the OK

button to find.

• Each time you press the OPT+ button, the sorting order of the found programmes change in the following sequence: by

channel, by descending time, by ascending time.

• Found Programme List may differ depending on the provided programme information.

GB38

User’s Manual

7. Record

7.1 Recorded Programme

1. Press the MENU button.

2. Select Record using the p/q button and press the OK or u button.

3. Select Recorded Programme using the p/q button and press the OK or u button. The recorded programme list appears.

Note:

• The programme being recorded will be added to the recorded programme list after it has been recorded for at least 30

seconds.

• Press the i button to see the detailed information about the programme you have selected if provided.

• When two other reservations with auto tracking conflict, the reservation with the earlier start time starts recording first. If the reservations have the same start time, the one with the lower channel number starts first.

Split

Displayed only when the programme is a split programme.

Series

Displayed only when the programme is a series programme.

Conflict

Displayed only if the programme was not recorded due to the conflict with other reservations.

Error

Displayed only when the recording is stopped because of an unexpected error.

Protect

Displayed when the channel is protected from deleting and editing.

Lock

Displayed when the channel is a locked channel.

1

2

3

4

1. Selecting/Unselecting Recorded Programmes

1. Select a programme and press the GREEN button. You can select multiple programmes.

REC1

2. To unselect the selected programmes, press the GREEN button again.

1

1

2

2

3

3

4

4

1

2

3

4

1

2

3

4

1

2

3

4

REC1

REC1

REC1

REC1

REC1

MHEG

MHEG

MHEG

MHEG

MHEG

MHEG

GB39

User’s Manual

7. Record

2. Deleting Recorded Programmes

1. After selecting reserved programmes using the GREEN button, press the RED button.

2. Select Yes and press the OK button to delete the recorded programmes.

Note:

• If the protect option of the programme is set to Enable, you cannot delete the programme. Please refer to 7.1.4 Changing the Attribute.

• You can delete multi programmes except for the protected programmes.

• When Deleting Recordings please ensure that only the recording(s) that you wish to Delete are selected. Unselect any Recordings by pressing the GREEN button.

3. Trimming the Recorded Programme

1. Select a programme and press the YELLOW button to trim the recorded programme.

2. A pop-up will appear. Select Trim and press the OK button.

3. You can trim the recorded programme using the following functions.

Note: You can trim recorded TV (Video) channels only.

Save

You can save the selected recording part as a different file.

Select the starting point using the t/u button and press the RECORD button. Select the ending point using the t/u button and press the RECORD button. Press the STOP button. A pop-up will appear. Select Save and press the OK button to save the selected part. Select Reset and press the OK button to reset the edit.

Warning: This function will overwrite the original recording.

GB40

User’s Manual

7. Record

Delete

You can delete the selected recording part.

Select the starting point using the t/u button and press the RECORD button. Select the ending point using the t/u button and press the RECORD button. Press the STOP button. A pop-up will appear. Select Delete and press the OK button to delete the selected part. Select Reset and press the OK button to reset the edit.

Note:

• You can select several parts simultaneously.

• After selecting the point you want using the t/u button, you can view the scene of the point you select by pressing the OK button.

Split

You can split the recorded programme into separate recordings.

Select the point you want to split using the t/u button and press the RECORD button. Press the STOP button. A pop-up will appear.

Select Yes and press the OK button to split the selected point.

GB41

User’s Manual

7. Record

4. Changing the Attribute

1. Select a programme and press the YELLOW button to change the attribute of the recorded programme.

2. A pop-up will appear. Select File and press the OK button.

3. Select Programme in the File using the p/q button and press the OK or u button to display a keyboard on the screen.Enter the programme name on the keyboard. Select OK and press the OK button to complete.

4. Select Protect in the File using the p/q button and press the OK or u button to change Enable/Disable. You have to enter a password to change the status from Enable to Disable.

5. Select Lock in the File using the p/q button and press the OK

or u button to change Enable/Disable. You have to enter a password to change the status from Enable to Disable.

6. After editing, you have to select Save and press the OK button to save your changes.

Note:

• If the protect option of the programme is set to Enable, you cannot delete the programme.

• If the lock option of a programme is configured to Enable, you have to enter a password to playback the programme.

Tip:

The default password is 0000. If you have forgotten your password, please contact your local product distributor.

7.2 Recording Schedule

You can set a programme to record automatically in Menu-Record-Recording Schedule.

1. Press the MENU button.

2. Select Record using the p/q button and press the OK or u button.

3. Select Recording Schedule using the p/q button and press the OK or u button to display the reserved recording list on the screen.

Note: You can schedule recording easily using the programme guide. Refer to Chapter 6. Programme Guide.

GB42

User’s Manual

7. Record

1. Selecting/Unselecting Reserved Programmes

1. Select a programme and press the GREEN button. You can select multiple programmes.

2. To unselect the selected programmes, press the GREEN button again.

2. Deleting Reserved Programmes

1. After selecting reserved programmes using the GREEN button, press the RED button.

2. Select Yes and press the OK button to delete the reserved programmes.

3. Adding a Reservation

1. Press the YELLOW button to add a new reservation.

2. Select Channel and Date. Press the u button to display channel and date lists and select one item using the p/q button and OK button. You can also select a channel using the NUMERIC(0-9) buttons.

3. Select Start/End Time using the p/q button and press the t/u button to move back 1 minute or move 1 minute ahead. To change the time using the NUMERIC(0-9) buttons, press the OK button.

4. Select Repeat mode among ONCE, DAILY, WEEKLY,

WEEKDAY(Mon-Fri) and WEEKEND using the t/u button.

Once

Weekday (Mon-Fri)

Daily

Weekend

Weekly

5. Select Lock mode using the t/u button.

6. Select Save and press the OK button to save the changes.

7. Select Cancel and press the OK button to cancel the reservation.

1

2

3

4

8. If the channel is locked1, you will be pr

2

3

4

ompted to enter the password to complete the reservation.

REC1

1

2 Not

3

e:

4

• The recording schedule can be o

REC1

verlapped with up to two other programmes.

1

2

REC1

• 3 T4he Power On/Off time can overlap the recording schedule.

• The recording icon will be displayed when the programme is being recorded.

REC1

REC1

• Press the i butt

MHEG on to see the detailed information about the programme you have selected if provided.

Tip:

The default passw

MHEG

ord is 0000. If you have forgotten your password, please contact your local MHEG

product distributor.

MHEG

MHEG

GB43

User’s Manual

7. Record

4. Sorting by Time/Name

Each time you press the BLUE button, the sorting order of the reserved programmes change in the following sequence: by descending time, by ascending time, by name.

5. Editing a Reserved Programme

1. Select a programme you want to edit and press the OK button.

2. For more information about how to edit the information, refer to 7.2.3 Adding a Reservation.

GB44

User’s Manual

7. Record

7.3 HDD Control

You can check the free space of the hard disk drive and format (erase) the disk drive if necessary.

1. Press the MENU button.

2. Select Record using the p/q button and press the OK or u button.

3. Select HDD Control using the p/q button and press the OK or u button.

4. You can check the free, used, reserved and total space of the HDD.

5. Select Format and press the OK button to remove all the recorded programmes saved on the HDD and initialise the

HDD.

6. Select Yes when the format confirmation message appears and enter a password to start formatting the HDD.

Note: A certain amount of space is reserved for TSR and PIP.

Tip:

The default password is 0000. If you have forgotten your password, please contact the Humax Customer

Helpline.

7.4 Recording’s Start/End Time

You can set the start/end time of recording.

1. Press the MENU button.

2. Select Record using the p/q button and press the OK or u button.

3. Select Recording’s Start/End Time using the p/q button and press the OK or u button.

4. Select the time using the p/q button and press the OK button.

Note: Auto tracking, split and series reservation in the programme guide are enabled only when Recording’s Start/End Time is set to On Time.

GB45

User’s Manual

8. Preferences

You can set censorship and all other items suitable for your environment.

Note:

• Press the BACK or t button to save the changes and return to the previous menu. Press the MENU or EXIT button to exit from the menu screen.

• You can easily select all menu items using the assigned number for each menu.

8.1 Parental Control

You can set parental control for each programme and change the password.

1. Press the MENU button.

2. Select Preferences using the p/q button and press the OK or u button.

3. Select Parental Control using the p/q button and press the OK or u button.

4. When prompting message is displayed to ask password, enter the password using the NUMERIC(0-9) buttons.

Tip:

The default password is 0000. If you have forgotten your password, please contact your local product

distributor.

1. Censorship Classification

Censorship Classification allows you to block programmes according to the age level you have set.

1. Select Censorship Classification using the p/q button and press the OK or u button.

2. Select the required age level using the p/q button and press the OK button.

Note:

• You have to enter the password to watch the programme which is blocked by the age level.

• Censorship Classification will only work if the required information is sent by the Broadcaster.

2. Change Password

You can change the current password.

1. Select Change Password using the p/q button and press the OK or u button.

2. Enter New Password using the NUMERIC(0-9) buttons, select OK and press the OK button.

3. Enter the new password again to confirm Verify Password and select OK and press the OK button.

Note: If you have changed and forgotten your password please contact the Humax Customer Helpline.

GB46

User’s Manual

8. Preferences

8.2 Language Setting

1. Press the MENU button.

2. Select Preferences using the p/q button and press the OK or u button.

3. Select Language Setting using the p/q button and press the OK or u button.

1. Audio/Subtitle Language

You can set the language for audio and subtitle.

1. Select Audio/Subtitle Language using the p/q button and press the OK or u button.

2. Select a language using the p/q button and press the OK button.

2. Subtitle Display

You can select to display the subtitle automatically or not.

1. Select Subtitle Display using the p/q button.

2. Select from Auto and Manual using the OK or u button.

Auto

Subtitles are displayed automatically in the predefined subtitle language.

Manual

Subtitles are displayed in the language when you select the subtitle language by pressing the SUBTITLE button on the remote control.

Note: Interactive service(MHEG) is not available when subtitles are displayed.

3. Subtitle Font

You can select the subtitle font .

1. Select Subtitle Font using the p/q button.

2. Select from Variable and Fixed using the OK or u button.

GB47

User’s Manual

8. Preferences

8.3 Time Setting

You can specify the current time and Power On/Off time.

1. Press the MENU button.

2. Select Preferences using the p/q button and press the OK or u button.

3. Select Time Setting using the p/q button and press the OK or u button.

1. GMT Offset

You can set the GMT offset for the current time.

1. Select GMT Offset using the p/q button and press the OK or u button.

2. Select your GMT offset using the p/q button and press the OK

button. GMT is changed by 30 minutes to 1 hour.

Note:

• The current time is set automatically whenever GMT offset changes.

• The time is detected from the Digital Transmitter that you receive the Digital channels from. It is not possible to enter the time.

2. Power On

You can set the time when the product is automatically powered on.

1. Select Power On using the p/q button.

2. Select Enable/Disable using the OK or u button.

Enable

Uses Power On and sets the Power On time.

Disable

Does not use Power On.

3. When you have selected Enable, enter Channel No. and Time using the NUMERIC(0-9) buttons and select OK and press the OK button.

3. Power Off

You can set the time when the product is automatically powered off.

1. Select Power Off using the p/q button.

2. Select Enable/Disable using the OK or u button.

3. When you have selected Enable, enter Time using the NUMERIC(0-9) buttons, select OK and press the OK button.

Note:

• Once Power On/Off is specified, it is repeated everyday.

• You can set the time when the product is automatically powered on/off overlapped with a recording schedule.

GB48

User’s Manual

8. Preferences

8.4 A/V Control

You can set the audio or video output control.

1. Press the MENU button.

2. Select Preferences using the p/q button and press the OK or u button.

3. Select A/V Control using thep/q button and press the OK or u button.

1. TV-SCART

You can set the TV SCART output.

1. Select TV-SCART using the p/q button and press the OK or u button.

2. Select an option among CVBS, RGB and S-Video using the p/q button and press the OK button.

2. VCR-SCART

You can set the VCR SCART output.

1. Select VCR-SCART using the p/q button.

2. Select from CVBS and S-Video using the OK or u button.

3. Audio Output

You can set the the audio output.

1. Select Audio Output using the p/q button.

2. Select from Stereo and Mono using the OK or u button.

4. Screen Ratio

You can set the aspect ratio of your TV.

1. Select Screen Ratio using the p/q button.

2. Select from 4:3 (Conventional TV) and 16:9 (Widescreen TV) using the OK or u button.

GB49

User’s Manual

8. Preferences

5. Display Format

You can select the display format according to the TV screen ratio.

1. Select Display Format using the p/q button and press the OK or u button.

2. If the screen ratio is set to 4:3, you can select an option among 16:9 Letter Box, 14:9 Letter Box and

Centre Cut-Out using the p/q button and press the OK button.

3. If the screen ratio is set to 16:9, this item will display Auto.

Note: If you have set the Screen Ratio to 16:9 you may also need to adjust your TV set to its 16:9/Auto

/Wide format.

8.5 Miscellaneous Settings

1. Press the MENU button.

2. Select Preferences using the p/q button and press the OK or u button.

3. Select Miscellaneous Settings using the p/q button and press the OK or u button.

1. i-Plate Display Time

You can set the duration of the information box to be displayed.

1. Select i-Plate Display Time using the p/q button and press the OK or u button.

2. Select an option between 1~20 seconds using the p/q button and press the OK button.

Note: When it is set to Disable, the i-plate will not be displayed when the channel is switched.

2. OSD Transparency

You can set the transparency of On Screen Display.

1. Select OSD Transparency using the p/q button and press the OK or u button.

2. Select an option among Disable, 25%, 50% and 75% using the p/q button and press the OK button.

GB50

User’s Manual

8. Preferences

3. Option in Channel List

You can set whether or not to display the scrambled icon in channel list and i-plate.

1. Select Option in CH List using the p/q button.

2. Select On/Off using the OK or u button.

4. Instant Replay Time

You can make the current programme go back 7, 15 or 30 seconds.

1. Select Instant replay time using the p/q button and press the OK or u button.

2. Select an option among 7, 15 and 30 using the p/q button and press the OK button.

5. Commercial Skip Time

You can skip 15,30, 60 or 120 seconds of the unwanted scenes.

1. Select Commercial skip time using the p/q button and press the OK or u button.

2. Select an option among 15, 30, 60 and 120 using the p/q button and press the OK button.

Note:

• Press the BACK or t button to save the changes and return to the previous menu, press the MENU or EXIT button to exit the menu screen.

• You can easily navigate all menus using the assigned number for each menu.

6. Power Saving in Standby

You can select whether the product switches to power saving mode in standby.

1. Select Power Saving in Standby using the p/q button.

2. Select from On and Off using the OK or u button.

GB51

User’s Manual

9. Edit Channels

9.1 Edit Channel Lists

1. Press the MENU button.

2. Select Edit Channels using the p/q button and press the OK or u button.

3. Select Edit Channel Lists using the p/q button and press the OK or u button.

4. Press the OK or u button in Group to select the group of channel list. Select the group using the p/q button and press the OK button.

5. Select a channel using the p/q button and press the OK

button. You can select more than one channel. Select Delete/

Lock using the p/q button and press the OK button.

6. Select Select All/Unselect All using the p/q button and press the OK button to select/unselect all channels.

Note:

• Press the TV/RADIO button to move to the TV or radio channel list directly.

• When the locked channel(s) is selected or all channels are locked, Lock is switched to Unlock. When you select Unlock and press the OK button, locked channel is switched to an unlocked channel.

Tip:

The default password is 0000. If you have forgotten your password, please contact your local product distributor.

GB52

User’s Manual

9. Edit Channels

9.2 Edit Favourite Channels

1. Press the MENU button.

2. Select Edit Channels using the p/q button and press the OK or u button.

3. Select Edit Favourite Channels using the p/q button and press the OK or u button.

4. You will be prompted to select a favourite group. Select a favourite group to edit using the p/q button and press the OK

button.

Note: Press the TV/RADIO button to move to the TV or radio channel list directly.

The icons for editing the favourite channel list are described in the following table.

Add

Adds favourite channel.

Remove

Removes from the favourite channel.

TV/RADIO

Switches between TV and radio channel list.

Fav.Group

Changes favourite channel list group.

Move

Changes the order of channels within the

favourite channel list.

Rename

Renames the name of favourite channel list.

Sort

Sorts channels by number or name in all TV/radio channel list.

Unselect All Unselects all the selected channel.

1

2

3

4

1

2

3

4

11

22

33

44

1

2

3

4

REC1

1

2

3

4

REC1

1

2

3

4

REC1

REC1

REC1

REC1

REC1

MHEG

MHEG

MHEG

MHEG

MHEG

MHEG

MHEG

GB53

User’s Manual

10. Installation

This chapter describes how to search for channels and other series of procedures.

Note:

• Press the BACK or t button to save the changes and return to the previous menu. Press the MENU or

EXIT button to exit from the menu screen.

• You can easily select all menu items using the assigned number for each menu.

10.1 Automatic Search

If your product is connected to the aerial and television, you can automatically search channels without entering any other information.

1. Press the MENU button.

2. Select Installation using the p/q button and press the OK or u button.

3. Enter the password using the NUMERIC(0-9) buttons.

4. Select Automatic Search from installation menu using the p/q button and press the OK or u button.

5. Automatic channel search begins.

Tip:

The default password is 0000. If you have forgotten your password, please contact your local product

distributor.

1. Search

Wait while channel search continues. This may take a few minutes.

1. While operating search, the cursor is located at Stop. Therefore, if you press the OK button during searching, the operation is stopped and the channels found until then will be displayed.

2. If search operation is successfully completed and the channel does not exist, press the OK button and try to reset the search operation again if necessary.

3. You can delete unnecessary channels from the searched

channels. Select the channels to delete and press the OK

button. Then select Delete and press the OK button. To delete all channels, select Select All to select all channels, select

Delete and press the OK button.

4. When completing channel search and deleting unnecessary channels, select Save and press the OK

button to save the changes.

GB54

User’s Manual

10. Installation

10.2 Manual Search

You can search channels manually by searching parameters, using the MUX information.

1. Press the MENU button.

2. Select Installation using the p/q button and press the OK or u button.

3. Select Manual Search using the p/q button and press the OK or u button.

1. Channel

Enter the channel to search. When entering channel value, the appropriate frequency value is displayed.

1. Select Channel using the p/q button and press the OK or u button.

2. Select one of channels using the p/q button and press the OK

button.

2. Frequency

Enter the frequency to search directly. When entering frequency, the appropriate channel for the entered frequency is automatically displayed on channel.

1. Select Frequency using the p/q button and press the OK or u button.

2. Enter the frequency using the NUMERIC(0-9) buttons and press the OK button.

3. Network Search

If specified frequency channel information and other channel information are provided together, the channel belonging to another frequency is also searched.

1. Select Network Search using the p/q button.

2. Select Enable/Disable using the OK or u button.

GB55

User’s Manual

10. Installation

10.3 Default Setting

Default setting restores the product to the default settings.

Warning: Please note that once you perform default setting, all data such as channel list and user configured data are deleted, no information on the HDD will be lost.

1. Press the MENU button.

2. Select Installation using the p/q button and press the OK or u button.

3. Enter the password using the NUMERIC(0-9) buttons.

4. Select Default Setting using the p/q button and press the OK or u button.

5. Select Yes and press the OK button to restore all setting to factory default. Select No and press the OK or BACK button to return to the previous menu.

6. Confirm again to start loading default setting. Enter the password using the NUMERIC(0-9) buttons to perform

restoring.

7. When completing the default setting, press the OK button to automatically run the installation wizard. For detailed information about the installation wizard, refer to Chapter 3.

Installation Wizard.

Tip:

The default password is 0000. If you have forgotten your password, please contact your local product

distributor.

10.4 Antenna Power

Make sure to set the Antenna Power to On when you connect an active antenna to the ANTENNA IN

connector on the rear of the product.

1. Press the MENU button.

2. Select Installation using the p/q button and press the OK or u button.

3. Select Antenna Power from the installation menu using the p/q button.

4. Press the OK or u button to select On/Off.

On

5V power supply from the active antenna cable.

+5V/50mA (max.)

Off

No power supply.

Note:

• Active antenna is a portable or indoor antenna which needs power supply from the product because it does not have power cord for itself.

GB56

User’s Manual

11. Software Update

In order to maintain proper performance of the product, it is essential to have the most up-to-date software. Visit the Humax website to check the latest news and newly released software versions.

http://www.humaxdigital.com

It is recommended that you periodically check for the availability of software update.

Important:

In order to receive Software Updates Automatically you must have the product in Standby mode at the time of the Regular Auto Update.

11.1 OTA (Over the Air)

OTA, an abbreviation of Over–the-Air, is a standard for the transmission of software through a broadcast system.

OTA is simply an alternative method for downloading software versions. However, the manufacturers reserve the right for deciding the release of the software for their products by beaming the latest software versions over the air via aerial. The software update via aerial will only occur under the following circumstances.

1. The equipment should have appropriate loader software. Caution: Please note that if normal loader software is not equipped, the product may not be updated or operate properly after software update.

2. The manufacturer decides to release the software via a designated channel.

3. The equipment must be tuned properly to the same aerial equivalent to that of the manufacturer.

4. Update software when the signal strength and quality is high. If the signal strength and quality are not recommendable, perform the software update later.

Caution:

• Please be careful to keep the power on and the power cord plugged in during software update. If the power is off during software update, fatal damage may be caused to the product.

• Please be careful not to pull out the signal line (co-axial cable) during software update. Update may be interrupted and the product may not operate.

Note:

• Other functions will not activate while software update takes place.

• It may take 5~10 minutes to update software.

• Scheduling operation cannot work during software update.

1. If new software is found when powering on

1. A message will be displayed to notify that new software is found.

2. Select Yes and press the OK button to update the software.

3. Starts downloading new software. Please wait until the update is completed.

4. When completing the software update, the equipment is automatically powered off and on again.

To find out what changes have been made to the product when new software is received please visit http://www.humaxdigital.co.uk

GB57

User’s Manual

11. Software Update

11.2 Updating Software from Menu

1. Press the MENU button.

2. Select Installation using the p/q button and press the OK or u button.

3. Enter the password using the NUMERIC(0-9) buttons.

4. Select Software Update using the p/q button and press the OK or u button.

Tip:

The default password is 0000. If you have forgotten your password, please contact your local product

distributor.

1. Automatic Update

You can set the product to find HUMAX software update site and update software automatically.

1. Select Automatic Update using the p/q button and press the OK or u button.

2. Automatically search for new software. Select Cancel and press the OK button to finish search.

3. When detecting software update, the following result is displayed. If new software is not found by automatic update, use manual update.

4. Select Yes and press the OK button to start updating. Select No and press the OK button to return to the previous menu without updating.

5. When completing the software update, the product is

automatically powered off and on again.

GB58

User’s Manual

11. Software Update

2. Manual Update

You can perform manual update using know MUX information.

1. Select Manual Update using the p/q button and press the OK or u button.

2. Select Channel using the p/q button and press the OK or u button.

3. Select the channel number using the p/q button and press the OK or u button.

4. Select Frequency using the p/q button and press the OK or u button.

5. Enter the frequency using the NUMERIC(0-9) buttons.

6. Select Search and press the OK button to search software.

7. Existing new software will show. If new software does not exist, press the OK button to return to the manual update menu.

8. Select Yes and press the OK button to start updating. Select No and press the OK button to return to the previous menu.

9. Performs software update. Please wait until it is completed.

10. When completing the software update, the product is

automatically powered off and on again.

3. Regular Auto Update and Search Time

You can specify the regular auto update and search time. Regular auto update is started in standby mode.

1. Select Regular Auto Update using the p/q button and press the OK or u button.

2. Select Enable/Disable and press the OK button to set or unset the search time automatically.

3. When selecting Enable, set Search Time using the NUMERIC(0-9) buttons and select OK and press the OK

button.

4. If you wish to cancel the entered time, select Cancel and press the OK button.

Note: Regular auto update will only work when if the product is in Standby at the time the Regular is set.

GB59

User’s Manual

11. Software Update

11.3 Software Update from PC

You can connect your product to the PC directly and update your software by transferring the new software from the PC.Follow these steps to download new software from PC to this product.

1. Download the new software file equivalent for this product model from our website(http://www.

humaxdigital.com).

2. Download and install the download tool from our website.

3. Connect your PC to this product with an RS-232C serial cable.

4. Execute the installed download tool and follow the instructions provided.

5. Power On/Off to start operating.

RS-232C Cable

RS-232C

GB60

User’s Manual

12. System

You can view all system information, signal detection and Common Interface.

1. Press the MENU button.

2. Select System using the p/q button and press the OK or u button.

12.1 Status

You can view system information.

Select Status using the p/q button and press the OK or u button.

12.2 Signal Detection

You can view the signal strength and signal quality of the channel that is currently on AV.

Select Signal Detection using the p/q button and press the OK or u button.

12.3 Common Interface

You can view the current status of the CI-Module.

1. Select Common Interface using the p/q button and press the OK or u button.

2. Select Slot and press the OK or u button. If Common Interface is available, you can view slot information.

Note: The displayed information about a Common Interface may differ depending on Common Interface type.

GB61

User’s Manual

13. Appendix

13.1 Menu Map

1 Recorded Programme

2 Recording Schedule

3 HDD Control

4 Recording’s Start Time

5 Recording’s End Time

Record

1 Parental Control

2 Language Setting

3 Time Setting

4 A/V Control

5 Miscellaneous Settings

Preferences

1 Edit Channel Lists

2 Edit Favourite Channels

Edit Channels

1 Automatic Search

2 Manual Search

3 Software Update

4 Default Setting

Installation

5 Antenna Power

1 Status

2 Signal Detection

3 Common Interface

System

GB62

User’s Manual

13. Appendix

13.2 Trouble Shooting

Before contacting your local service centre, please read the tips below carefully. If the problem persists after completing the following procedure, please contact your local product distributor or service centre for further instructions.

1. No message displayed on the front panel. (The product will not switch on.)

• Check the main power cable and make sure it is plugged into a suitable power outlet.

• Check that the mains supply is switched on.

• Check that the power switch is on at the rear of the product. (where applicable)

• Connect the power cable to a different power outlet.

2. No picture on TV set

• Make sure that the product is powered on and in operation mode. (Press the STANDBY button)

• Make sure that the AV cable is firmly connected to the TV.

• Make sure that the antenna cable is properly connected to the product.

• Check the brightness level of the TV.

• Check if the channel is currently on air. Contact the broadcaster to ensure that the channel is running.

• Press the SOURCE button if the product is in external input mode.

3. Poor picture/sound quality

• Install the antenna in an obstacle-free place.

• Make sure there is no mobile phone or microwave oven near the product.

• Adjust the antenna direction to get the better picture.

• Set the antenna power in menu to On, if you use the active antenna to improve the reception. (where applicable)

4. No or poor sound

• Check that your AV cable is connected correctly.

• Check the volume levels of your TV set and the product.

• Check if the product or TV is on mute.

• Check audio type or soundtrack option in the AV menu.

5. Remote control does not operate.

• To control the product, the top end of the remote control should point directly towards the receiving part of the product.

• Remove and reinsert the batteries in the remote control.

• Replace the batteries in the remote control for a new set.

• Set the remote control from TV mode to DTV mode, if you use the universal remote control.

6. Cannot make reservations.

• Check that no previous reservations are conflicting with the new reservation.

• Check that the product is switched on at the time of the reservation.

7. No password information is given.

• The default password is always 0000.

8. Channel search does not work.

• Make sure that the antenna is connected correctly.

• Use the appropriate antenna capable of receiving VHF or UHF channels for your area.

9. Cannot update new software.

• You can get an update. If the product does not show a message requesting update, that means no software is available.

GB63

User’s Manual

13. Appendix

10. Cannot watch scrambled channels.

• Check that you have the appropriate CI-Module. Reinsert the CI-Module and make sure it initializes correctly.

• Check in the menu that the product is detecting the CI-Module.

• Check in the menu that you have a valid and working subscription to the channels you wish to view.

• Ensure that the CI-Module is not damaged.

11. Cannot watch pay channels.

• Check in the menu that you have a valid and working subscription to the channels you wish to view.

• Contact your network operator for more information.

12. Cannot record progammes.

• The hard disk is full. Delete unnecessary programmes and make space for new recording.

• Check if recording is overlapped with another channel. Stop the current recording or wait until the recording is finished.

13. Cannot operate the TSR (Time Shifted Recording).

• The TSR may not be available during the recording. Wait until the recording is finished.

• Delete unnecessary programmes and make space for new recording.

14. The product makes a humming noise.

• The noise is from the fan; the hard disk is operating normally. This kind of noise is inevitable but seldomly noticeable.

15. Cannot playback.

• To play back the recorded file of a scrambled channel, use the Smartcard. In case it has been a long time since you last recorded, this may not work. Contact the product distributor.

• The signal during the recording may be weak or the hard disk too full.

16. Cannot change channel while recording.

• Certain channels may not be changed due to restriction of the tuner type.

17. How can I receive new channels?

To receive new channels please perform an Automatic search in the Installation menu and they will be added to the channel list, please refer to the Installation section of your manual. If channels change position you will need to carry out a Default Setting in the Installation menu : 1. Press MENU button.

2. Select Installation and press OK button.

3. Enter your password (Default = 0000)

4. Select Default Setting and press OK button.

5. Select YES and press OK button.

6. Enter your password (Default = 0000)

Note: The receiver will then restart and search for the channels again.

Important:

When you carry out a Default setting no information on your HDD (recordings) will be removed. You will need to setup any schedules and any Favourites list you have created.

18. There is picture but no sound on my PVR.

• Make sure the volume on the PVR and TV is up. Check that the PVR and the TV are not set to Mute. Make sure that the Scart cable to the TV set is connected to the “TV” scart connection on the back of the PVR.

19. My remote control does not have all of the functions that are displayed in the User Manual.

• The PVR remote has a slide down section on the bottom third of the remote where additional buttons are available.

GB64

User’s Manual

13. Appendix

20. When I try to edit a recording I am unable to use the 6 function buttons on the bottom left of the screen.

• To use these buttons press the PAUSE button on the remote control, then use the arrows to navigate to the function buttons.

21. I am trying to download the software via my PC but it will not start.

• When you receive the message ˇ°Waiting for Humax connectionˇą on your PC, make sure that the cables from the PC to the PVR are connected, and then power the PVR on from the rear ON/OFF switch.

22. I get a message “E-OS” (or E-05) on the front display every morning.

• This message will appear when the PVR has tried to download the software automatically but the download has been corrupt or failed. To resolve the issue see the instructions on how to carry out a Default Setting. When the update is released again the PVR will update automatically.

23. The Installation menu is greyed out when I access the menu.

• It is not possible to access the Installation menu when you are playing back a recording or when a recording is in progress. You will need to stop the playback/recording to access the menu.

24. When I switch my PVR on I receive the E-AC error message.

• This error is caused by corrupt Application software; see the Software Download section for more information.

25. When I access the menu I no longer have a record icon in the menu, instead the menu options start with Preferences and Games appear at the bottom?

• When the recording icon does not appear in the menu then the HDD has not initialised on start-up.

Power off the PVR from the rear ON/OFF switch for 2 minutes and then power on again. If the record option is still no longer available please contact the Customer Helpline.

26. How do I change channels on the PVR?

There are several ways to change channels, see the Channel Change instructions for more information: 1. Enter the channel number using the numeric keypad on the remote control.

2. Using the CH+ and CH- buttons on the remote.

3. Press the OK or LIST button on the remote to display the channel list, use the p or q arrows to navigate through the list, press OK to change to the channel you require 27. The Time on my PVR is not correct.

• Go to MENU g PREFERENCES g TIME SETTINGS menu and change the GMT OFFSET in 1 hour intervals until the correct time is displayed. If the time is only several minutes incorrect then this may be an issue from the transmitter as the time is detected from the Digital Signal.

28. When my PVR is connected I am not able to receive any/all of the channels on my TV.

• Check that you have a RF (coaxial) cable connected from the TV/VCR output on the PVR to the aerial input of your TV set.

• If the problem is experienced when the PVR-9150T is placed in Standby mode, then please access MENU g PREFERENCES g MISCELLANEOUS SETTINGS g POWER SAVING IN STANDBY - switch this option OFF so that the signal will be passed through to the TV when in Standby mode.

29. My EPG takes a long time to load each time I switch the PVR on.

• The PVR does not store the EPG information in standby or powered off, instead it refreshes the information each time you switch on. The time take to populate all of the information may depend on the channel you are tuned to, it is recommended to go to BBC 1 where the information will be downloaded quicker.

GB65

User’s Manual

13. Appendix

30. I receive the message “Antenna Power has short-circuited”.

• To resolve this problem please access MENU g INSTALLATION (enter your password as 0000 if you have not changed it), then switch the Antenna Power option to OFF, finally Exit the menu and the message will no long be displayed.

31. How to I receive new channels?

There are 2 ways to receive new channels:

• Carry out an Automatic Search (instructions)

• Carry out a Default Setting (instructions)

32. I have received Analogue channels on my exiting TV without problems but I am not receiving any/all of the Digital channels?

• The Analogue and Digital channels will not be sent in the same manor and at times will be sent from different transmitters. You cannot compare the Analogue channels signal/quality to the Digital channels.

Please check that you are in a Freeview coverage area (www.dtg.org.uk or www.freeview.co.uk). You may be required to have your exiting aerial upgraded to receive digital channels.

33. When I press the TEXT or RED button the digital Telextext/Interactive menu does not appear?

Follow the steps below:

• Check if the facility is working on a different channel and then try the channel you wish to use

• Press GUIE or MENU and then EXIT and then after 10 seconds try to function again

• Power off the PVR for 30 seconds and then restart it and try the facility again 34. I am unable to access the EPG when I am playing back a recording

• The EPG is not available when playing a recording, stop the recording and go to a live TV channel where you will be able to access the EPG

35. When I try to playback a recording I am unable to see it on the full screen, instead it only plays back in the small thumbnail at the top of the screen.

• When you access the Recorded Programmes menu and press play on the recording you wish to view, press the EXIT button on the remote control to see the recording on the full screen.

GB66

User’s Manual

13. Appendix

13.3 Error Message

Error message

Possible causes

What to do

No or bad signal

The aerial is not pointing properly.

Adjust aerial.

Check the cable from the aerial. If you cannot

resolve the problem, you may need to have

your aerial and installation tested by a

professional.

The channel is

The channel has signal, but no audio or video. Check if the channel is currently on air.

scrambled or not

The channel is deleted by the broadcasting

available.

company.

The channel is for data broadcasting.

(Cannot watch the channel in usual way.)

The audio is not

The channel has signal, but no audio.

Press the SOUNDTRACK button to check if

available.

the channel has audio.

CI-Module is not

CI-Module is not installed.

Install proper CI-Module.

installed./ Invalid CI-Module is not properly inserted.

Pull out the CI-Module and plug it in.

CI-Module

CI-Module is broken.

Replace CI-Module.

GB67

User’s Manual

13. Appendix

13.4. Specification

Tuner & Channel

Input Connector

IEC 169-2 female

Frequency Range

470 MHz to 858 MHz

Signal Level

-70 to -10 dBm

Demodulation

OFDM

Mode

2K, 8K

FEC mode

1/2, 2/3, 3/4, 5/6 & 7/8

Guard Intervals

1/4, 1/8, 1/16 & 1/32

MPEG Transport Stream A/V Decoding

Transport Stream

MPEG-2 ISO/IEC 13818

Profile Level

MPEG2 MP@ML

Input Rate

15 Mbit/s Max

Aspect Ratio

4:3, 16:9

Video Resolution

720 x 576

Audio Decoding

MPEG/MusiCam Layer I & II

Audio Mode

Single /Dual mono/ Stereo /Joint stereo

A/V & Data In/Out

Video

TV SCART/VCR SCART Video Output (CVBS, S-Video, RGB)

Audio L/R

TV SCART/VCR SCART Volume and Mute Control

(Resolution:20bits DAC, MAX. 2Vrms)

RS-232C

9 PIN Male Socket

Power Supply

Input Voltage

90-250V a.c., 50/60Hz

Type

Switching Mode Power Supply (SMPS)

Power Consumption

Operation - Max 26W

Power Saving in Standby - 0.9W

Protection

Separate internal fuse & Lightning protection

GB68

User’s Manual

13. Appendix

Physical Specification

Size

360 mm x 50 mm x 245 mm

Weight (Net)

2.9kg

Operating Temperature

0 ºC to +45 ºC

Storage Temperature

-10 ºC to +70 ºC

GB69

User’s Manual

13. Appendix

13.5 Glossary

1. Aerial

A device that collects and amplifies electromagnetic waves. Also called “Antenna”

2. Coaxial cable

A specially designed and shields cable that can transport signals with high frequency 3. Frequency

The property of a signal measured in cycles per second (=Hz).

4. FTA (Free- To-Air)

An unscrambled broadcast al owing customers to view channels or services without paying any subscription.

5. HDD (Hard Disk Drive)

The primary computer storage medium, which is made of one or more aluminum or glass platters, coated with a ferromagnetic material

6. MUX

The transmitter/frequency/channel where the programme provider/operator transmit a package of digital channels/services. Usually there are several MUX frequencies with different or same content.

7. Network

The collection of channels/services that a programme provider/operator offer. These services may be transmitted from one or several MUXes. In the transmitted data stream the operator may transmit a service information table(network information) that informs the Product about all available services in the network.

8. OSD (On Screen Display)

OSD displays the basic information necessary for the users to configure monitor or TV settings. OSD

information may include brightness, contrast, tuning, RGB adjustment, and screen size and position 9. OTA (Over The Air)

A standard for the transmission of software for equipment, through a broadcast system. Manufacturers reserve the right for deciding the release of the software for their products.

10. PIP (Picture In Picture)

A function that allows you to display 2 different TV channels (or TV inputs) on one screen.

11. PVR (Personal Video Recorder)

Video recorder that can record and play back programmes directly using the embedded hard disk drive(s).

12. RF (Radio Frequency)

Television signals are modulated onto RF signals and are then demodulated by your television’s or STB’s tuner.

13. SCART

A 21-pin connector standard to connect two pieces of Audio-Visual equipment such as a TV and a VCR.

Each device will have a 21-pin female connection; a cable with male connection at both ends is used for connecting the devices.

14. S/PDIF (Sony/Philips Digital Interface format)

A standard format for the transfer of digital audio signals. It allows the transfer of digital audio between two devices without any conversion to and from analogue, which could degrade the signal quality.

15. Trick-Play

Pause, Fast Forward/Fast Rewind, Slow Motion, Instant Replay, Commercial Skip, Repeat A-B.

16. TSR (Time Shifted Recording)

A function that record the present programme temporarily to support trick-play.

GB70

User’s Manual

13. Appendix

13.6 Service and Support

You can get information such as a troubleshooting guide, software upgrades and product support guide from the following web sites and call center (Hotline).

Important:

in the UK we want customers to contact our Helpline and NOT go to the retailers.

UK

Tel:

0870 247 8800

Opening Hours:

Mon-Fri 09:00-18:00 (excludes Bank Holidays)

E-mail:

uksupport@humax-digital.co.uk

Website:

www.humax-digital.co.uk

Language:

English

Deutschland

Tel:

01805-778870 (€ 0,14/Min)

Öffnungszeiten:

Mo-Fr 8:00-23:00 Uhr, Sa-So. 8-20 Uhr

E-mail:

support@humax-digital.de

Website:

www.humax-digital.de

Sprache:

Deutsch/English/Turkish

Australia

Tel:

1800 613 011

Opening Hours:

Mon- Fri 9:00-17:30

E-mail:

techinfoau@humaxdigital.com

Website:

www.humaxdigital.com/australia

Language:

English

Italia

Tel:

899 100 080 (€1+ VAT/min)

Orario:

Lun.-Ven. 8:00-18:00

Mon-Fri 8:00-18:00

Lingua:

Italiano

GB71

User’s Manual

13. Appendix

Sverige

Tfn:

+46 (0)550 85527

Öppettider:

Mån-fre 08:00-16:30

Språk:

Svenska/engelska

Suomi

Puh:

09 56186366

Aukioloajat:

ma-pe 8:00-16:00

Kieli:

suomi/englanti

Austria

Tel:

0820 400675 (€0,14/min)

Opening Hours:

Mon-Sun 8:00-23:00

E-mail:

support@humax-digital.de

Website:

www.humax-digital.de

Language:

Deutsch/English/Turkish

Note: For hardware repair, please visit our website.

GB72

User’s Manual

www.humaxdigital.com

ROHS/MANUAL/PVR9150T/300GB(UK)

*20000-00076PT*

20000-00116PT

Document Outline

- ��

- ��

- ��

- ��

- ��

- ��

- ��

- ��

- ��

- ��

- ��

- ��

- ��

- ��

- ��

- ��

- ��

- ��

- ��

- ��

- ��

- ��

- ��

- ��

- ��

- ��

- ��

- ��

- ��

- ��

- ��

- ��

- ��

- ��

- ��

- ��

- ��

- ��

- ��

- ��

- ��

- ��

- ��

- ��

- ��

- ��

- ��

- ��

- ��

- ��

- ��

- ��

- ��

- ��

- ��

- ��

- ��

- ��

- ��

- ��

- ��

- ��

- ��

- ��

- ��

- ��

- ��

- ��

- ��

Table of Contents

bookmar

1. Before Using the Product . . . . . . . . . . . . . . . . . . . . . . . .

1.2 Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.3 Conditional Access . . . . . . . . . . . . . . . . . . . . . . . . . .

1.4 Rear Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.5 Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . .

2. Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.2 Connecting the TV . . . . . . . . . . . . . . . . . . . . . . . . . .

2.3 Connecting the TV and VCR . . . . . . . . . . . . . . . . . . . . . . .

2.4 Powering On . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3. Installation Wizard . . . . . . . . . . . . . . . . . . . . . . . . . .

4. Basic Operation . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.4 Programme Information (i-plate) . . . . . . . . . . . . . . . . . . . . .

4.5 Option List . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.6 Channel List . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.7 PIP (Picture-in-Picture) Screen . . . . . . . . . . . . . . . . . . . . . .

4.8 Game. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5. PVR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5.2 Recording. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5.3 Programme Playback in the Play List . . . . . . . . . . . . . . . . . . . .

5.4 Chase Play . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5.6 Additional Time Shift Operations . . . . . . . . . . . . . . . . . . . . .

6. Programme Guide . . . . . . . . . . . . . . . . . . . . . . . . . . .

6.2 Selecting Channel Group . . . . . . . . . . . . . . . . . . . . . . . .

6.3 Using Time Bar. . . . . . . . . . . . . . . . . . . . . . . . . . . .

6.5 Finding Programmes. . . . . . . . . . . . . . . . . . . . . . . . . .

7. Record. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7.2 Recording Schedule . . . . . . . . . . . . . . . . . . . . . . . . . .

7.3 HDD Control . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8. Preferences. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8.2 Language Setting . . . . . . . . . . . . . . . . . . . . . . . . . . .

8.3 Time Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8.4 A/V Control . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8.5 Miscellaneous Settings . . . . . . . . . . . . . . . . . . . . . . . .

9. Edit Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . .

9.2 Edit Favourite Channels . . . . . . . . . . . . . . . . . . . . . . . .

10. Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . .

10.2 Manual Search . . . . . . . . . . . . . . . . . . . . . . . . . . .

10.3 Default Setting. . . . . . . . . . . . . . . . . . . . . . . . . . .

11. Software Update . . . . . . . . . . . . . . . . . . . . . . . . . . .

11.2 Updating Software from Menu. . . . . . . . . . . . . . . . . . . . . . .

11.3 Software Update from PC . . . . . . . . . . . . . . . . . . . . . . . .

12. System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

13. Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

13.2 Trouble Shooting . . . . . . . . . . . . . . . . . . . . . . . . . .

13.3 Error Message . . . . . . . . . . . . . . . . . . . . . . . . . . .

13.4. Specification . . . . . . . . . . . . . . . . . . . . . . . . . . .

13.5 Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

13.6 Service and Support . . . . . . . . . . . . . . . . . . . . . . . . .